> ## Documentation Index
> Fetch the complete documentation index at: https://www.notifuse.com/docs/llms.txt
> Use this file to discover all available pages before exploring further.

# Build a welcome sequence

> Send three emails over a new subscriber's first week with an automation that starts when they join a list.

You end up with an automation that sends a welcome email when someone joins a list, a second email three days later and a third at the end of their first week.

## Before you start

- A workspace with an email provider set for **Marketing emails** in Settings › **Integrations**. Automation emails go out through that provider unless a step picks another one.
- A list that new subscribers join. See [Lists](https://www.notifuse.com/docs/features/lists.md).
- Know whether that list uses double opt-in. It decides which event starts the automation (step 2).

### 1. Create the three templates

Open **Templates** and click **New template** once for each email. The **Gallery** has a **Welcome** model you can start from for the first one, and **Simple** gives you a logo, a paragraph and a footer for the other two.

For each template, set the **Subject** and the **Sender** in its settings. The automation sends each email with its template's own subject and sender: an Email step has no field to change them.

Set the **Category** to **Marketing** for all three, including the one built from the **Welcome** model, which starts as **Welcome**. Two things depend on it:

- An Email step checks the contact's status on the list only for Marketing and Blog templates. If the contact unsubscribed, bounced or complained, the email is skipped and the contact leaves the automation. With any other category, the email is sent anyway.
- The **Sender** field lists the senders of your marketing email provider, which is the one the automation sends with.

Keep `{{ unsubscribe_url }}` in each email so subscribers can leave the list. See [Templates](https://www.notifuse.com/docs/features/templates.md) for the editor and the Liquid variables.

### 2. Create the automation and its trigger

Open **Automations** and click **New automation**. Type a name in the **Automation name** field at the top.

In the left column, under **Settings**:

- **List**: the list new subscribers join. Email steps stay disabled until you pick one ("Select a list to enable email nodes").
- **Frequency**: **Once per contact**, so a contact goes through the sequence at most once.

Click the trigger step and set **Trigger Event** to **List**, then pick the event that matches your list, and the same list in the trigger's **List** field:

- **Subscribed** for a list without double opt-in. It fires when a contact is added to the list as active.
- **Confirmed** for a double opt-in list. A form signup lands as pending, and when the subscriber clicks the confirmation link their status moves from pending to active. That move fires **Confirmed**, and **Subscribed** never fires for them.

On a double opt-in list, contacts you add from the console, with an API key or by CSV import skip the pending status and fire **Subscribed**. If you want them welcomed too, build a second automation with the same steps on **Subscribed**.

![The trigger of an automation: the list event and the list it watches](https://www.notifuse.com/docs/assets/screenshots/automation_trigger.png)

### 3. Add the emails and the delays

Add steps from the palette in the left column, or with the **+** under a step. Build this chain under the trigger:

1. **Email**: pick the first template in **Email Template**.
2. **Delay**: set **Wait Duration** to 3 **Days**.
3. **Email**: the second template.
4. **Delay**: 4 **Days**.
5. **Email**: the third template.

The second email goes out three days after the contact joined and the third on day seven. **Wait Duration** takes 1 to 365, in minutes, hours or days.

Leave **Email Integration** on **Use workspace default** unless these emails must go through another provider.

![A welcome sequence on the canvas: the trigger, then emails separated by delays](https://www.notifuse.com/docs/assets/screenshots/automation.png)

### 4. Save and activate

Click **Create** to save the automation. It starts as a draft and sends nothing yet.

Click **Activate**, then **Yes, activate** in the "Activate automation?" dialog. From then on, each new event that matches the trigger starts the sequence for that contact. Contacts who joined the list before you activated it don't enter.

To change a live automation, click **Pause** first, edit, save, then activate it again.

### 5. Test with your own address

Join the list yourself, the way your subscribers do:

- **Subscribed** trigger: open **Contacts**, add yourself with **New contact**, open your contact, click **+** (**Subscribe to list**) in its **Lists** panel, pick the list and click **Subscribe**.
- **Confirmed** trigger: sign up through your form and click the link in the confirmation email. Adding yourself from the console won't start this automation, because it fires **Subscribed**. See [Add a double opt-in signup form](https://www.notifuse.com/docs/tutorials/newsletter-form-input.md).

Check your inbox for the first email. To check the delays without waiting a week, set them to a few minutes while you test, then put back 3 and 4 days before real subscribers arrive. Pause the automation to edit it.

With **Once per contact**, an address goes through the automation only once, so use a different address for each test run.

## Check that it works

Open your contact in **Contacts**, go to the **Activity** tab and pick the **Events** filter. You should see "Entered the automation" with your automation's name, then "Completed the automation" once the last email has gone out. A contact who unsubscribed shows "Left the automation" with the reason, and a journey that hit an error shows "Failed in the automation".

The console has no step-by-step view of one contact's journey. For the whole automation, open it and turn on **Stats** in the editor header, then pick **7 d**, **30 d** or **All time**. Each step shows what the journeys did there, and Email steps show how many emails were sent, delivered, opened and clicked.

![An automation with Stats on: how many contacts reached each step](https://www.notifuse.com/docs/assets/screenshots/automation_step_stats.png)

Each email also appears in **Logs**, on the **Messages** tab, with the **Automations** origin. See [Logs](https://www.notifuse.com/docs/features/logs.md).

## Next steps

- [Add a double opt-in signup form](https://www.notifuse.com/docs/tutorials/newsletter-form-input.md) to feed the list.
- [Automations](https://www.notifuse.com/docs/features/automations.md) covers the other step types, such as Filter and A/B test.
- [Win back inactive customers](https://www.notifuse.com/docs/guides/win-back-customers.md) once your subscribers have been around for a while.
